YT-24 type rock drill is used at quarries, mines or tunnels to digging holes. The machine is an important mechanical tool at many industries such as traffic, architecture, irrigation works and national defense engineering.
YT-24 type rock drill can be used to digging horizontal holes, vertical holes or angling holes on medium-hard rock or hard rock. The dimension of the hole is about 34-42mm, the depth can reach 5 m.
The machine is not only can worked with FT140BD type air leg but also can worked with the wagon drill.
In order to make sure the machine can work smoothly, the machine is equipped with the FY200 type or FY200A type oil injector.
Powerful drilling
The powerful combination of percussion and rotation originates in the very efficient tubular valve.
TY24 is also equiped with a powerful flushing mechanism which enables efficient removal of cuttings also when drilling deep holes.
High durability
The external parts have a sturdy design, and the internal parts, subjected to severe working conditions, are either heat treated or chromium plated and all components are precisely finished. The drill´s complete lubricating system assures trouble-free and economical operation.
Easy operation
Perfection of balance and convenient portability have been main concerns in the design of YT24. The drill can be used for long periods due to the minimum recoil. YT24 guarantees dependable
and efficient drilling with a minimum of operator fatigue.
Model |
YT24 |
Weight |
24 |
kg |
Length |
604 |
mm |
Cylinder diameter |
70 |
mm |
Piston stroke |
70 |
mm |
Air hole inner diameter |
19 |
mm |
Water hose inner diameter |
13 |
mm |
Shank Standard |
22×108 |
mm |
Dimameter of Bit |
φ30-φ42 |
mm |
Working air pressure |
0.4-0.63 |
Mpa |
Air consumption |
≤50 |
L/Sec |
Impact energy |
≥58 |
J |
Impact frequency |
≥27 |
HZ |
Max. hole depth, approx. |
5 |
m |
Dimension |
735×305×218 |
mm |
|